While tuners and race pilots are getting their machines ready for the season, Stage6 is launching a lot of new products that are guaranteed to set new records.
After launching the 6-disc clutch, the reed valve V-Force 4R and the intake manifold High Flow for 50cc supermotards Stage is now setting new standards for 50cc scooters. Exhausts R1400 MKII and R/T 90 – 100 cc, crankshafts HPC MKII, cylinders StreetRace 50 cc – these new tuning parts were recently presented by the Maxiscoot team in a Facebook Livestream.
At the same time the manufacturer announced the return of two products that are indispensable for racing: The homologated environmental mat and the racing tent will be available at the beginning of the 2020 season.
And there is also a new baseball cap for Stage6 fans. The Trucker Cap is adjustable with a curved peak and can be worn in everyday life as well as at events. All new products in detail.
The Stage6 HPC crankshaft (High Primary Compression) was developed to support sport / midrace, racing and high-end cylinders up to 77 cc. The precise balancing allows a significant reduction of vibrations at high rpm and therefore more linear acceleration compared to conventional crankshafts. The full circle design increases pre-compression and thus the efficiency of the engine.
- Forged connecting rod for 10mm or 12mm pins
- Solid steel webs
- For Minarelli / Piaggio
- For sport / racing / high-end cylinders up to 77cc
- From 125 to 160 €.
The Stage6 Streetrace series has recently been added to – 4 new 50cc cast iron cylinders for Minarelli LC / AC and Piaggio AC / LC. The road-legal kits offer a substantial increase in torque and a slight increase in top speed. Ideal for everyday use!
- cast iron cylinder with 40 mm borec
- cylinder heads high compression (LC) + with improved ribs and O-rings (AC)
- 2-ring piston
- 5 ports + simple exhaust
- for Minarelli / Piaggio
- maximum power 6 / 7 PS or 3 to 4 PS more than original
- from 110 to 125 €.
The Stage6 R1400 MKII exhaust differs from its predecessor by its completely new design and more volume to take full advantage of the new generation of powerful cylinders, including the 2Fast 70 cc. Its wide range allows better torque and leads to more power. Ideal for the racetrack, including drag racing, since power is increased throughout the entire rev range.
- high-end exhaust, unpainted
- for high-end cylinders 70cc – 77cc
- for Minarelli engines
- handmade in Italy
- bent outlet
- carbon silencer
- 340 €
The Stage6 R/T 90 – 100 cc exhaust is built to maximize the performance of high-end racing cylinders 90 to 100 cc. It was developed on the basis of the 2Fast 94 cc and then revised and adjusted. The exhaust supports a wide power range and is very versatile, it has been optimized for 2Fast 90 / 94 / 100 cc, Airsal 88 cc, Top Performances 86 cc cylinders.
- high-end exhaust unpainted
- for high-end cylinders up to 100 cc
- for Minarelli engines
- handmade in Italy
- bent outlet
- carbon silencer
- 340 €
The environmental mat from Stage6, introduced in 2017, quickly became a victim of its own success and was sold out immediately. After several months of waiting, it is now back in stock.
- FIM approval
- High absorption capacity (3 litres per m²)
- Rubber base and reinforced edges for good grip
- Light (3.4 kg) and flexible, can be rolled up for transport
- Colourfast
- Easy care (machine washable at 30°C)
- 80 €
The Stage6 tent, one of the most important equipment for events and races, will be available again in March! It is more compact than the Stage6 Racing Team’s tent (3 x 3 m vs. 3.7 x 2.5 m), and it will also be cheaper! Stay tuned!
- Foldable paddock tent
- Extremely resistant
- 3 x 3 m (9 m²)
- Roof height adjustable from 210 to 320 cm
- 175 € without tent walls / 225 € complete